1304 1600
Flow limitation valve MBV with float control

1306 Flow limitation valve MBV with float control

Components

  • 1: Main valve
  • 2: Ball valve (A, B, C)
  • 3: Filter
  • 4: Orifice
  • 5: Throttle check valve
  • 6: Control valve
  • 7: Differential pressure orifice plate
  • 8: Optical position indicator (optional: Electrical position indicator, opening limiter)
  • 9: Float valve
  • 10: Float
  • 11: Float protection pipe (optional)
  • 12: Pressure gauge with ball valve
  • B: DN 40 to DN 150: 22 mmDN 200 to DN 250: 27 mmDN 300 to DN 400: 29 mm
  • X: 5 x DN line
  • Y: 3 x DN line
Datasheet manual

performance diagram

certificate

Article No. DN PN
(bar) 		L
(mm) 		weight
(kg) 		Availability Watchlist
1306007000 1 1/2" 16 210 11.000 on demand
MBV with float control DN 1 1/2" PN 10/16
1306007000
Add to an existing list
1306008000 2" 16 210 11.000 on demand
MBV with float control DN 2" PN 10/16
1306008000
Add to an existing list
1306040000 40 16 200 15.750 on demand
MBV with float control DN 40 PN 10/16
1306040000
Add to an existing list
1306050000 50 16 230 16.250 on demand
MBV with float control DN 50 PN 10/16
1306050000
Add to an existing list
1306065000 65 16 290 21.300 on demand
MBV with float control DN 65 PN 10/16
1306065000
Add to an existing list
1306080000 80 16 310 27.400 on demand
MBV with float control DN 80 PN 10/16
1306080000
Add to an existing list
1306100000 100 16 350 35.400 on demand
MBV with float control DN 100 PN 10/16
1306100000
Add to an existing list
1306125000 125 16 400 51.500 on demand
MBV with float control DN 125 PN 10/16
1306125000
Add to an existing list
1306150000 150 16 480 76.000 on demand
MBV with float control DN 150 PN 10/16
1306150000
Add to an existing list
1306200000 200 10 600 114.600 on demand
MBV with float control DN 200 PN 10
1306200000
Add to an existing list
1306200016 200 16 600 114.600 on demand
MBV with float control DN 200 PN 16
1306200016
Add to an existing list
1306250000 250 10/16 730 247.000 on demand
MBV with float control DN 250 PN 10/16
1306250000
Add to an existing list
1306300000 300 10/16 850 358.000 on demand
MBV with float control DN 300 PN 10/16
1306300000
Add to an existing list

Physical characteristics

  • The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium.
  • Most valve types operate purely hydraulically without any foreign energy.

Application

  • To use in drinking water systems (other media after consultation)
  • Limitation of an inflow into a water reservoir
  • Maintaining the filter flow constant whilst taking into account the water level

Mode of operation

  • The flow–control valve completely hydraulically ensures a pre–determined maximum flow, irrespective of any changes in the operating pressure taking into account the level of water in the reservoir (the float control opens when the water level is low). The nominal flow rate can be progressively varied up to ±15% via the control valve. The valve closes when the level of water in the reservoir has been reached.

Product information

  • To calculate the dimensions of the valve please refer to the following information:
  • Maximum and minimum inlet pressure (static and dynamic pressure ratios)
  • Counterpressure from the water level in the reservoir
  • Required flow rate
  • Permissible loss of pressure incl. measuring orifice (usually 0.5 bar over the valve and orifice plate)
  • Available line diameters and lengths
  • Construction of the valve (straight or angle design)
  • For the calculation basis, information on the loss of pressure and the characteristic values of the valve, please refer to the end of Chapter E.

Design

  • Design according to DIN EN 1074
  • Construction length acc. to DIN EN 558
  • Flange mass according to DIN 1092-2, to PN 25 DN 300
  • Pressure levels: PN 10 or PN 16 to DN 300, PN 25 to DN 200, higher pressures on request.
  • Nominal widths DN 50, DN 80, DN 100 and DN 150 available in angular design
  • Nominal widths 1 ½" and 2" with threaded connection (female thread)
  • Medium temperature up to 40°C

Installation and assembly

  • Shut–off valves should be fitted on both sides of the valve and a dirt trap should be installed on the inlet side of the valve. Depending on the installation situation, a mounting/dismounting adapter and an aeration and ventilation system should be provided.
  • The orifice plate must be installed after the valve. It is recommended that the following measurements are taken into consideration:
  • X = 5 x DN, distance between the valve and the orifice plate in a straight line
  • Y = 3 x DN, distance after the orifice plate and the shut–off component, in a straight line

Vantages

  • Maintenance-free, non-rusting valve seat
  • Pressed-in seat
  • EWS-coating according to RAL GSK
mehr
  1. Watchlist
  2. Contact
    1. DE
    2. EN